 # string art diseño o boceto quimera de luz por jorge de la tierra

let’s see how to make the sketch design
for the work that we will call chimera of light, to carry out this work we are going
to use a table of dimensions 61 x 61 centimeters the first thing we’re going to
realize is to leave a margin of the sides horizontal and vertical sides of 2
centimeters now we will place half of the part
horizontal in this case 28.5 centimeters, from there we will trace
a vertical line from 5 centimeters away, from the margin to where
we started the line that line has a distance of 38.5 centimeters then we are going to do center
at this point here that is located at 4 centimeters from the vertical line
and at a height of 37 centimeters from where the vertical line started towards
up doing center at that point let’s draw an arch from the side
left in a similar way we will the right side remember that the beginning of said
line is at a distance of 5.8 centimeters and in the final part we have
from the margin a height of 14.5 centimeters and width 18.5
centimeters, in those distances you must be the end point of the side arch
left and right side now we will draw a semicircle, making
center at the end of the line vertical that we had built
previously with a radius of 12 centimeters
we will trace that curve finally we will draw two curves plus one
on the left side and one on the side right as follows, seat
center where we finished the previous arch we are going to make said stroke the starting point of said curve begins
at a distance from the horizontal side of 8 centimeters and the vertical side of 9
centimeters and ends at a distance of 23.5 centimeters from the horizontal side
and 4 centimeters from the vertical side, of this side and the opposite side. if you wish
know how the tensioning of the threads for this work I invite you to give
click on the following notification after having used our
bulldozer to place the nails we have used the following amount
for each of these curves 23 nails the biggest curve
63 nails for each of them the semicircle forty-seven nails
and the center line 63 nails each they are separated 0 7 centimeters to
exception of the vertical line that are separated 0 5 centimeters. in total for
this work we used 282 nails of a inch. we can only use the
thread tensioning tool for finish our work, if you like this
video do not forget to like it subscribe to my channel activates the option of
notifications so that when you upload another video you know never forget
share thanks

#### One Comment

• Minhtrung Nguyen says:

Helo