string art diseño o boceto HÉLICE por jorge de la tierra

string art diseño o boceto HÉLICE por jorge de la tierra


let’s see how to make the design sketch for the work that we will call helix For this we will use a table of dimensions 61 x 61 centimeters, first thing we’re going to do is leave a margin of the horizontal sides and the vertical sides of 2 centimeters then we will build four circles with the following radios 1.5; 4; 17.5 and 28.5 centimeters respectively now we will make 12 divisions in the first circumference and in the third For this we are going to perform the following procedure as the diameter of the first circumference is 3 centimeters then multiply 3 times pi 3.14 16 and we divide it by 12 so we’ll get the distance between point and point around the circumference in this case would be 0.78 centimeters for the first circumference for the third circumference we perform the same procedure on diameter is 35 centimeters then we multiply 35 by pi which is 3.14 16 and we divide it by 12 we have a distance of 9.1 centimeters between point and point now we are going to project the points of the first circumference with those of the third circumference we are going to join them sub divide now the last circumference also in 12 parts remember how the diameter is 57 centimeters then we multiply 57 by pi which is 3.14 16 and we divide it by 12 to get a distance of 14.9 centimeters between point and point now we project a 15.5 centimeter line since this distance It is also 15.5 centimeters so that we remain symmetric, we will project it from this point to this point until the full turn music finally we project some lines also of 15.5 centimeters from the end of each of these lines towards the points that are formed in the second circumference If you want to know how I prepare the base for a string art work, I invite you to click on this notification we just have to make some divisions between point and point of 0.7 centimeters to later place the nails If you want to see how I have tensed the threads for this work click on the following notification for this work we will use the following quantity of nails or lace for each of the lines we have here for each of the 12 lines we will use 22, 3/4 nails inch apart from each other 0.7 centimeters and for these lines 12 also in total we will use 43 one-inch nails separated one from the other 0.7 centimeters, in total for this work we will use 823 nails if you like this video do not forget to like it subscribe My channel activates the notifications option so that when another video you’re aware never forget to share, thanks

5 Comments

Leave a Reply

Your email address will not be published. Required fields are marked *