# string art diseño o boceto arbol navideño por jorge de la tierra

hello that such friends welcome once more to a tutorial of the series how make the designs or sketches for string art works, for today I bring you a new tutorial a work to which we have called Christmas tree to make this work we are going to use a table of dimensions 52 X 70 centimeters, the first thing we are going to do is leave a margin of the sides horizontal and vertical sides of 2 centimeters we will also trace half of the vertical part of our table in this case it would be 24 centimeters each side then we make the following marks in the vertical line that we have drawn 6 centímeters 12; 16,5 ; 21 25,5; 30; 34,5; 39 ;43,5; 48; 52,5 y 57 centimeters respectively and then we are going to draw horizontal lines perpendicular to said line that we have in half the measures of these lines are the next 12 centimeters again 12; 9; 9; 27; 18; 27; 36; 27 and 18 centimeters respectively said lines are worth half of the line vertical half of the left side and half of the right side at the top where we will build a star we are going to draw two lines parallel to the vertical axis from this point upwards and from this point up we remember that the distance that there is from this point towards up to 12 centimeters then we draw the diagonals of said square we will also trace the following lines from this point we draw in the upper part a line of 5 centimeters on this side and on this side from this point we also draw two lines to this side and to this side from this point we draw a line to this side and to this side remember that they are 5 centimeters and from this point we draw the same lines of 5 centimeters on this side and this side then we will trace the following lines to build the tree body from the point where the star ends let’s go down to the left and to the right and from this point we are going to build a line that intersects this point in this sense and in the opposite direction then we will project this point towards this line and this point towards this line we will also project this point towards this line and this point towards this line then we will project two lines from this point to this point and from this point to this point we will also project a line from this point to this point and from this point to this point and then we will project two lines from this point to this point and from east to east on the left side and the side straight finally we are going to draw two parallel to the vertical axis with a distance of 9 centimeters of each side to build the trunk of our tree said lines they are separated to the left 4 centimeters and to the right the same distance then we will project this line to the left and to the right 4.5 centimeters the same as this line and this line and making center in this projection we are going to build six circles radio 2.5 centimeters If you want to see how the tensioning of the threads for this work has been done, I invite you to click on this side of the screen where a notification will appear will take to said video. for this work we will use the following amount of nails for the star of the top we will use in the vertical line and the horizontal line in each of them 20 nails in the four points of our star we will use 18 separate nails one of the another 0.6 centimeters for each of the pictures that make up the body of our tree We are going to use 36 nails separated from each other 0,7 centimeters and for the six circles that we have in the lateral parts We will use for each of them 23 nails separated one from the other 0.7 centimeters and for the trunk of the tree we are going to use an amount of 50 nails also separated 0.7 centimeters from each other in total for this work we will use 799 one-inch nails if you like this video do not forget to like it subscribe to my channel activates the notification option so that when you upload another video you’re aware never forget to share thanks

Bro. You just keep getting better and better.❤❤❤✌

PARABÉNS PELO BELÍSSIMO TRABALHO!!!

Top 👏👏👏👍

GENIAL!

Excelente trabajo 👍

Excellent brother u r the best

I have PDF ready with me.

👍

Que tipo de hilo utilizas porfavor me puede responde y no me diga solo hilo que me dejara con mas duda ajajaja=)like

No le entiendo

Jorge saludos totales lo ise asi como lo hiciste, pero las uniones no coinciden, puedes especificar bien las medidas.

Saludos jorge

Esperontu respuesta

En las lineas verticales no le entendi me ayudas espero tu respuesta

Toujours du beau travail