string art boceto Portal 3D por jorge de la tierra

string art boceto Portal 3D por jorge de la tierra


music let’s see how to carry out the 3D portal work
for this we are going to use a table of dimensions 52 x 52 centimeters, what
first thing we’re going to do is leave a margin of the horizontal side and side
vertical 2 centimeters let’s make the following marks,
let’s take half from our horizontal side in this case
they are 24 centimeters let’s take a distance of 20
centimeters from this point towards up on this side and on this side let’s take another distance from this
point upwards of 28 centimeters this side and the other side we will unite the central point with the distances that
we had marked previously now we will do the same
procedure on the back remember that we are going to mark half
from our horizontal side and with the points that we had marked
previously of 20 centimeters and 28 let’s build the same lines to make the following marks
from this point up we’re going to take a distance of 9 centimeters from
left side taking this line as reference
to mark 10 centimeters and the other side the same, taking as reference this
line we are going to mark 10 centimeters again from this point up
we left 9 centimeters and having as reference this line and this line we’re going
to leave a distance of 10 centimeters on this side and 10 centimeters of this
side we will perform this procedure
inverse from this point upwards 9
centimeters and taking as reference this line and this line we are going to leave 10
centimeters on this side and 10 centimeters on this side from this point upwards 9
centimeters and taking as reference the same line we are going to leave a
distance from this point up of 10 centimeters and from this point
upward 10 centimeters if you want to see how I made the
tensed of the threads for this work you I invite you to click on this side of the
screen where a notification that will take you to said
video. now let’s draw some lines in each of the corners of our
work we will use the following measures, from this corner to the
left we will mark 19 centimeters on the right side and on the left side from the right corner up we’re going
to mark 15 centimeters on this side and from this side let’s draw two lines from the
corner of each corner these lines are going to touch this
point and at this point but leaving a three centimeters distance remember that this procedure is going to
perform on the opposite side a distance from this corner towards
the left of 19 centimeters of this side and this side 15 centimeters from the corner towards the
top part just like this side now let’s draw two lines from the
corner of each corner, this line goes to try to intercept this point and this
point but let’s leave a distance 3 centimeters in this way we see how we have the design for the
work that we have called 3D portal if you like this video do not forget to give it
I like to subscribe to my active channel the option of notifications so that when
upload another video you’re never aware forget to share thanks. we can only
make points with some distances of 0.6 centimeters one of the others for
Then place the nails, to this work we have used the following
amount of nails in this row we have 42 nails
in this 41 in the next we have 50 and 49 and in the last one we have 61 and 60 of
this side and the opposite side in each of the corners we have the following
amount 24 nails going down and 23 to the left 10 and 10 in total for this
work we will use 858 nails of a inch

6 Comments

Leave a Reply

Your email address will not be published. Required fields are marked *