string art boceto para la obra ESPECTRO por jorge de la tierra

string art boceto para la obra ESPECTRO por jorge de la tierra


hello how about friends let’s see one more time
How to make a design or sketch for one of our string art works today
let’s work on a table of dimensions 70 x 70 centimeters and let’s go
to make a work whose name is spectrum, as a first step we are going to
leave a margin on the entire table of 2 centimeters of the horizontal side and 2
centimeters from the vertical side we’re going to find half of that table in
the horizontal part and in the vertical and let’s draw the two diagonals for
find the center. now let’s draw two circles from
the central part of 5 and 15 centimeters radio making use of the transporter we are going to
perform 16 divisions of 22.5 degrees and let’s draw a few lines from the
center but let’s draw the line to from the outside of the
first circumference towards the part outside of the second circumference now let’s draw some lines to
from half of the part horizontal to the middle of the part
vertical on this side of this side and of the opposite part now let’s leave a margin from this
point to the left and from this point to the right and we will draw
parallel to the lines we had previously drawn if you’re here it’s because you want to perform
the work that I have called spectrum for I invite you to click on this side
of the screen where a notification that will take you to said
video, then let’s draw a series of lines as follows
from this point that is half of the table up to this point we have 30.9
centimeters then let’s do 3 divisions of 10.3 centimeters and we’re going
to draw a few lines the first line the let’s plot with reference
this point and this point here said line has a length of 7
centimeters we will continue the projection towards the vertical part with
a distance of 7.5 centimeters let’s make a second projection from
this point towards this line but with a length of 8 centimeters
again we are going to make a line from this point remember that the
distance that is here is 10.3 centimeters let’s draw a line
having as reference that point and this point here with a distance of 8
centimeters a line more than seven centimeters
from this point and having as reference this point of the
circumference now let’s draw two lines in shape
of v in this part and two in this part with an angle of 30 degrees from this
line 30 degrees the same as in this felt the line is going to have a
distance of 7.5 centimeters let’s draw another line from the end of the
second circumference down of seven centimeters taking as
reference this point and the second division of the horizontal line we will trace these lines in each
room of our table remember that here we have a division
two divisions and two of the part later we see how our work remains spectrum us
would be to make a divisions of 0.6 centimeters one from the other to
later nails the nails we have placed a series of lace on
our work from this point to this point we have a quantity of 7
lace around the circumference every 45 degrees we have 9 sprigs these
lines each line has a quantity of 16 lace from this point to this
point we have 12 nails or nails what same as this side and this side and
in this part and this we have a quantity of 13 nails
in this corner we have from this point up to this point 12 nails just like here
from here to here we have 17 and here 13 from this point to this point
we have 18 and here 21 and that sequence is repeat for the other side and in each
of the corners of our work in total the tip amount is 1,406 if
you like this video do not forget to give it I like to subscribe to my active channel the
option of notifications so that when upload to another video you’re never aware
forget to share thanks

6 Comments

Leave a Reply

Your email address will not be published. Required fields are marked *