string art boceto o diseño AFRICA por jorge de la tierra

string art boceto o diseño AFRICA por jorge de la tierra


let’s see how I made the design
sketch for the work that we have called Africa to carry out this work we are going
to use a table of dimensions 60 x 30 centimeters the first thing we’re going to
realize is to leave a margin of the sides one centimeter horizontal and the
vertical sides of 2 centimeters then we will find half of the part
horizontal and half of the part vertical in this case in the part
horizontal are 28 centimeters and in the vertical part 14 centimeters the figure that we have built consists of
a square in the central part where eight triangles are inscribed we have a
triangle in the lower left the same as in the top
right and an oval on top left the same as an oval in the
bottom right of form symmetric the measures that we have
used to perform this work are the following we have left a
mark to subsequently place a I nail in this place at a distance of
1.8 of the vertical part and 1.8 centimeters of the horizontal part of
same way for the opposite side in the bottom side, we have drawn a line
horizontal also with a distance from the margin down from 1.8 with
a distance of 21 centimeters the distance to start plotting this
line and it’s 5.5 centimeters in the part
lower let’s draw a line from the margin to the top 1.8
centimeters away the same as from the margin on the left side towards
where we start to draw the line and this line goes up to half of
our table the distance of said line is 26
centimeters we place half in this case 13 centimeters and we draw
a perpendicular line with a 12 centimeters distance from that
point let’s intercept with the point from the bottom of the left side
and on the right side to build the triangle that we observe here
triangle on the left and on the right part is built from the
Following way at a distance from the margin towards the
right of 1.8 centimeters and a height of 3.3 centimeters
we draw a vertical of 10.5 centimeters and we place half and
we draw a horizontal line of 5.8 centimeters, we intercepted that point with
the point above and with the point of down to build that triangle. the
oval of the left side and the oval of the lower right part is
build with a rectangle of next measure a distance from the
left margin to the right of 2.7 centimeters from the side of the margin
top down 3.8 centimeters the distance from the horizontal line goes to
be 7.5 centimeters and the line vertical of 11.5 centimeters also
let’s draw a line diagonal
from the second point that equals 0 6 centimeters from the triangle up
with a distance of 24.5 centimeters the distance where said line ends with
respect to the horizontal margin is 3.3
centimeters in the central part we will build a
square as follows from the center to the left
we mark a distance of 10.5 centimeters
in the same way as for the right for the top and for the part
lower we join those points to build a
square and in the inner part of said square we are going to subdivide it for
build the 8 triangles that we see here They are built as follows
from this point upwards a distance of 6.5 centimeters 9
centimeters for the vertical part and the Diagonal 6.5 centimeters too
we have left a separation in the center of 0.6 centimeters. I want to remind you that
All my designs or sketches are for the sale just like a tool
that allows you to level the nails Shipping to anywhere in the world. for
this work we have used the following amount of nails or nails
for each of the lines of the part upper and lower 18 separate nails
one from another 0.6 centimeters for the ovals we have
used 32 nails for triangles from the left and the right
42 one-inch nails for each of them separated one from the other 0.6
centimeters for the triangle at the bottom and
from the top 60 nails for each one of them. separated in these two
lines 0.6 centimeters and in these lines every 2 centimeters
for the square each of the triangles on the outside have
30 nails and two of the inside 27 nails in total for this work
we will use six hundred and fifty-two one-inch nails. if you liked this
video do not forget to like it subscribe to my channel activates the option of
notifications so that when you upload another video you are aware. never forget
share, thanks. if you want to see how the carried out the tensioning of the threads for
this work I invite you to click on the next notification

One Comment

Leave a Reply

Your email address will not be published. Required fields are marked *