EASIEST SURVIVAL HACK – Make a plastic bottle STRING MAKER with just a knife IN 5 MINUTES!

EASIEST SURVIVAL HACK – Make a plastic bottle STRING MAKER with just a knife IN 5 MINUTES!


here is a little trick i want to show you
i made a little mess but yeah
lets see how this works how are we going to do this?
well first of all we need a bottle cap like this one
this one is a little flat for my taste but doesnt matter
lets say that you are trapped inside a jungle or some place dangerous
and all you have is your plastic bottle
obviously the little cap and a knife
how do you expect to get materials? well string is a very usefull
thing to have so having this around is very useful
in stuff like settin traps and whatnot im going to show you do it without any
fancy tools just some things you should have in a survival
situation like this kitchen knife
of course the bottle cap and im going to use this pliers
because everybody has one if you dont have one
i guess you can use your fingers so first of all we need to make two cut on
each other side of the bottle cap im going to speed it up cause it is going
to take a while there we go
be careful not to cut yourself while doing this im using this dull knife
doesnt have any edge on it if youre wondering
it is for my own safety because im super clumsy
i dont want to stab myself out of pure stupidity
now once we’ve done this cut we measure the position of the other
it should be on the oposite side and you can actually press your way in
so two cuts on both sides of the bottle cap and the other two cuts are going
to be horizontal just like this
and when you are positioning your knife bear in mind that if you
do i too close to the top it is going to leave a very
thin string the string is going to be
very thin and you want it to be
i say that this kind of thickness it is 5 mm
and it is good because it doesnt break
if you make it too thin you are going to pull and then
it is going to break on you try not to make it too thin
so im going to measure it actually with my string
about the middle so yeah im going to make a
incition right in the middle of the cap and again im going to speed it up cause
you dont want to see me just sawing my way throught
with a blunt knife the other day i saw someone post a video
a survival hack or something were you can use two razor blades
to heat water you just connect them to the mains
with a separation that it is just two razor blades with a toothpick
or something like that i was just thinking
what the hell! i mean
if you acctually touch any one of the blade
lets say you touch the live one and then you get a shock
and inmediately you are going to close your hand because of the electricity
so you are going to electrocute yourself and posibly burn your hand
and then you are going to just grab and grab the
razor blade as hard as you can and you wont be able to let it go
so you are going to cut all your fingers
electrocute yourself and then die
all because you wanted to heat water with some garbage you
found in your bathroom i mean you need to be very careful
with electricity i dont know i just saw that an i was furious
i didnt want to insult anyones work so i didnt say anything
but i left a comment i dont think anyone actually read it
so yeah one we are through we just start cutting
and basically we are done so to start cutting the bottle
we just need im going to use some scissors but actually
you should be using the knife and make a little stripe
im just trying to make it the right lenght because if you do it too big it just going
to break on you
believe me i tried a couple of times
it will break if it is too wide i widen up the cut of the cap
so it will be a little more easier to set so unce you get this
you put your knife throught to the other side
there we go and then start pulling
and pray it doesnt break on you so yeah once you
start pullig it should get to the right lenght and you just pull and pull
this is so satisfying im going to go all the way in
look this is all curby
there we go look at how it ended
this is amazing! this is so fun
im going to try it with another bottle sorry im actually going to show you what we
did this is very useful for doing stuff
im actually going to use it for a gardening project
because i dont want to buy real things
i just want to use things that are free because im poor
this is the other one i made this is a little bit nicer
maybe because of the area of the bottle but now we are going to use this one because
i want to lets do that again
we cut a little stripe to get it started
we put our gadget in here the stipe goes
under the knife and then we atart pulling
sorry… and keep on pulling and there we go
a bunch of string do you want me to go all the way in with the
bottle? i can do that
ok now we are set and we pull
there we go if you want the string to keep going you have
tu push in this direction but if you want it to end just try to
point the knife to the top and it will cut it like this
but yeah im not going to do that
im actually going to go all the way in
so that is set and lets wreck this
bottle that noice on the background is the factory
near my house dont pay atention to it
just pay attention to piece of beautiful art lets see how far can we go until it breaks
that is how far this bottle it is actually kind of difficult
for this things it has the mysterious brand bottle
that you already know but yeah you can actually make a lot of this
string is it very resistant you can use it for everything
and if you use a bigger bottle you can make even better ones
i dont want to be naming brands but you already know
wich brand was because i forgot to take of the label
so hope you liked the video it is very easy to make
you just need the knife a bottle cap
that cames with the bottle so yeah and pliers
and of course the bottle
so yeah hope you liked it
and i’ll see you next time

28 Comments

Leave a Reply

Your email address will not be published. Required fields are marked *